Features :

• Microprocessor Control Based Panel
• 100% Reversible
• Inspection from both sides
• Easy to opearte & easy to clean
• Superior belt quality
• Magnifying lens for better viewing

This machine is specially designed for 100% visual inspection of tablets from both sides and 1,00,000 tablets per hour can be inspected on this GMP Model by employing 2 operators thereby reducing inspection cost considerably.

Tablet Inspection belt consist of stainless steel complete body, S.S Hopper from which tablets fall on a magnetic vibrator that removes chips and dust from the tablets and feed them on 6 inches wide belt for one operator to inspect the other side of the tablets (minimum size of the tablet 3 mm & maximum size of the tablet 19 mm.)

New microprocessor Electronic control panel gives new look and easy Operation. Touch switched are provided to operate the machine. The intensity of the vibration of the vibrator can be varied to ensure smooth falling of tablets on te belt, similarly speed of the belt can also be adjusted so that inspection rate can be increased-decreased depending on the percentage of rejection. Complete body, Hopper, Top cover etc are made of stainless steel. Two foot switches are provided for operators.

The machine is suitable for 230 Volts Single Phase. A.C. 50 Hz & as per GMP Standard.

Ideal for visual inspection of medicinal tablets, Ink Tablets, rubber caps, & Confectionary sweets etc.

Specifications

Length:	200 cm
Height :	150 cm
Width :	50 cm
Approximate Weight :	430 Kgs
Net Weight	320 Kgs
Motor power :	0.25 HP DC Single Phase
Size of the belt :	6"width x 69" Length 6"width x 157.5" Length

Model:- C-DS 3
The Appratus consists of Acrylic waterbath tank. The size of the tank is 31cm L x 21cm W x 27cm H fitted with immersion heater of 500W. The waterbath tank is fixed on a mild steel plate, size 33 cm L x 36 cm W x 0.5 cm thickness.

Front panel incoporates main switch, temperature/Timer display. Imported water circulation pump is provided to keep the temperature of the waterbath uniform. Green light illumination in acrylic bath for better viewing of Disintegration

A 500 W water heater running on all the four side of the waterbath is fixed at the bottom of the waterbath. Temperature and time indications have both combined in one display unit thereby providing acccurate digital indications of both the parameters. The indicator shows temperature and time alternatively every 5 seconds. The temperature sensing is done by PT-100 probe.

3 nos transparent sleeves of Glass (Height 60cm) with an internal diameter of 52cm and wall thickness of about 3.5mm is fitted with stainless steel metal discs each of which conatains 39 holes of 4mm each in diameter being distributed as per the specifications given by usp std.

The discs are separated by distance of about 30cm. The metal device is attached to the outer sleeves by means of three equally spaced hooks.

The equipment is suitable for 230 V AC 50 Hz and supplied with 2mt connecting cable.
Supply :      230 V 50 Hz 1 Ph. (Optional 110 V 60 Hz )

Model No :- C-BD 100

Features :

• Easy to Operate all the functions
• Two Cylinders holder having easy mechanism to insert and take out.
• Simultaneous tapping and rotating assures an evenly packed surface.
• Calculation of test results will be displayed directly on the instrument panel by feeding the correct data.
• An audible alarm after the test is over.

The "THERMONIK" Bulk Density is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacture.

The Bulk density apparatus is equipped with Microcomputer Based 'Digital Display' System. The "TOUCH SWITCHES" are provided on the front panel of the apparatus for setting total number of strokes to the glass cylinders. Each stroke of the cylinder is displayed on the "Digital Display' window on the panel. The Up and down movement of the cylinders stop automatically at the Pre-set number and at the same time an audible Alarm sounds indicating the test is over. The advantage of Micro-Computer based Digital Display over the Old type model with the mechanical Timer is that "Digital Display" of total strokes gives accurate and exact number of Strokes given to the cylinders. The Touch Switches Can be set to any required strokes start right from minimum 1Stroke to 9999 strokes maximum.

Specifications

Display:	4 Digits LED
Dimension:	280 mm x 290 mm x 275 mm
Weight:	Net Wt 15 kgs.
Supply:	230 V 50 Hz 1 Ph. (Optional 110 V 60 Hz )

In the new and sophisticated model C-BD 100 Calculator is not required for test results. The results will be displayed directly on the instrument panel by feeding the correct data. Apparatus is suitable for working on 230 Volts, Single Phase A.C. 50Hz. Supplied with a pair of 50 ml glass cylinders and connecting cable.

100ml and 250ml Cylinders will be supplied at extra cost.

Model No:- C - LPT 5

This equipment is specially designed for testing of the porosity of lacquer or wax which is internally coated on tubes as per ISI std.

The coated tube is filled with test-solution containing copper sulphate and copper electrode is immersed in this solution. The tube itself makes contact with the cathode and fixed small D.C. potential is then applied between the sliding top copper whose flow is proportional to the areas of the surface not covered by internal coating. In addition visual indication is provided by deposition of copper if coating is not continuous.

The equipment is capable of giving reading within three ranges of current viz 0-500 mA and 0-50 mA and 0-5 mA by A range selector switch selecting the appropriate range.

The equipment provides the required information quickly and reliably and is particularly suitable for quality control application.

Assembled in a mild steel cabinet of size 27.5 cm x 22.5 cm x 17.5 cm. Finished in stoved enamel grey paint. The equipment is suitable for 230V AC 50 Hz

Model :- C – WWTDH 500 N

The model C-WWTDH 500 N extends the successful line of manually operated Campbell Electronics Tablet hardness Tester. The C-WWTDH 500 N is capable of measuring sample weight, width, thickness, diameter and hardness.

The tablets are inserted manually one after the other into the unit. Any shapes and forms can be accomdated and tested with this new model.

A comprehensive test report is generated automatically as soon as the desired number of samples has been successfully tested. The report shows report Serial number, calibration and calibration due dates, product name, product number, Batch ID, Press side ID, operator ID, test start date and time, tolerance limits, Weight, width, thickness, diameter and hardness, data summary statistics - Unit of measure, samples size Maximum & Minimum data values, data range Sabs, Srel.

The functionality of the C-WWTDH 500 N can be extended by attaching an external analytical balance. In addition, the tester has connections for an external Key board & Printer. Output of results can be made immediately Via-in-line printer or to a central data system Via the RS – 232 interface.

Features :

• Blue Graphic Display
• Easy to operate
• Accurate measuring weight, width, thickness, diameter and hardness
• Precise Tablet Positioning.
• Easy to Calibrate.
• Compatible to any scale.

Units of Measure : The unit of measure can be selected and stored together with the product definition.

Weight	g/mg
Width	mm/inch
Thickness	mm/inch
Diameter	mm/inch
Hardness	Network/Kp/Sc/UD (User Defined)

External Scale
The weight of a tablet can be recorded and correlated to other instrument parameters by attaching on external scale ( Any scale-Mettler, Sartorius, Shimatzu etc).

Calibration
Calibration can be carried out << in- house>> and required only few minutes. The - simple but complete calibration procedure can be carried out at any time using the calibration kit thus eliminating the necessity to return the instrument to the supplier. The date of the calibration and calibration due date automatically documented on each print out.

File
File upto 150 test methods.

Pass word Protection
3- level password protection to secure instrument parameter settings and instrument log.

Tongues for C-WWTDH 500 N
Some Tablet shapes require a groove bottom plate in order to prevent them from displacing during the hardness tester. For these application you can order the groove plates as an optional extra.

Keyboard drawer
A keyboard drawer has been added in order to optimize space. The drawer also allows the Keyboard to be stored safely out of the way.

Safety Guard & Collection Tray
Un-breakable Perspex polycarbonate Guard with Collection tray for broken tablets.
Specifications

Model No:	C-WWTDH 500N
Weight	0-60 g
Width	0-10 mm/inch
Thickness	0-15
Diameter	0-45 mm
Hardness	0-500 N
Hardness Units	Newtons, Kiloponds, strong Cobb & UD (User Defined)
Maximum Sample Diameter	45 mm
Max no of Samples	100
Input power	90 v - 270 V AC
Measurements	L (525 mm) x D (350 mm) x H (200 mm)
Weight	25 Kg